Edge Part Background
１．If Paper Edge Background occurs, you will be required of the following as below.
■ Case of failure
During the continuous output, event does not occur until a few sheet of papers, but it may occur in the middle.
The uneven density appears periodically at background image with developing sleeve pitch..
3500i/4500i/5500i/6500i/8000i：45mm
■ How to Respond
Check the Firmware and Upgrade to the Ver. 5.00 or above.
Please run the calibration after upgrade it.
End Background
occurs in the
magnetic roller
pitch
Sample 1：Case of failure （Monochrome Machine）
25
To Next Page
Loading...