TASKalfa 3500i - J05 x8;J44 xx JAM during Duplex Printing; JAM during Duplex Printing

Check the firmware version. （Engine）
・8000i/6500i : 2LF_1000.002.005
・5500i/4500i/3500i : 2LF_1000.002.005
J05x8/J44xx(JAM during Duplex printing)
JAM during Duplex printing
a. If the version is older than the righthand, upgrade the firmware to the latest version.
b. After above “a” action, if JAM is still not solved, Replace the Conveying Unit.
Refer to the service bulletin No. 2LC-0036(B402),2LC-0083(C126) for the detail information.
Modified from the production machine of May, 2012 .
J05x8/J44xx(JAM during Duplex printing)
Model Part No. Description
5500i/4500i 302LH94042 PARTS CONVEYING H UNIT(G) SP
3500i 302LL94012 PARTS CONVEYING L UNIT(G) SP
8000i/6500i 302LF94052 PARTS CONVEYING H UNIT(Z) SP
32