GTS Technical Manual
5. March 2013 Edition: V1.10/2013 6-10
Copyright © 2013, Diversey Inc.
06.18.11 electronics - 455B_V1.00.fm
6.3 Electronics
6.3.2 Mounting of electronics
Picture 6: Electronics
• Connect the wires to the electronics.
• Complete assembling according to the chapter MOUNTING OF
HANDLE COVER AND ELECTRONICS.
Tighten the connectors with the correct torque. Refer to adjustment
or the spare parts list.
Adjustment
M5 screw: 5.0Nm --> +24VDC, brush and vacuum motor
M3 screw: 3.0Nm --> GND