GTS Technical Manual
5. March 2013 Edition: V1.10/2013 5-16
Copyright © 2013, Diversey Inc.
05.10.32 handle - bowden cable adjustment - 455B_455E_V1.00.fm
5.1 Handle
5.1.11 Bowden cable adjustment
Picture 19: Eccentric shaft
• Position the eccentric shaft (01/136) together with the end bolt
of the bowden cable (01/119) on the lever (01/116).
Remarks
By turning the eccentric shaft counter clockwise you tension the
bowden cable.
Picture 20: Eccentric shaft detail
Adjustment
Make sure that the bowden cable is not tensioned too tight. Let the
handle adjustment lever have enough play (+/- 1mm).
• When the needed tension position is reached, press in the
eccentric shaft into the lever to lock it.
Make sure that the articulation moves smoothly and that the
toothrockers engage firmly into the tooth head wheel.
To Next Page
Loading...
Need help?
General