104
Troubleshooting Guide Model C606
PROBLEM PAGE
REF.
REMEDYEITHER SIDE
PROBABLE CAUSE
SOFT SERVE SIDE
PROBABLE CAUSE
SHAKE SIDE
PROBABLE CAUSE
12. Excessive
mix leakage
into the long
drip pan.
a. The seal on drive
shaft is improperly
lubricated or worn.
a. Lubricate properly or
replace the seal.
52 /
56
b. The seal is installed
inside-out on the
drive shaft.
b. Install correctly.
52 /
56
c. Inadequate
lubrication of the
drive shaft.
c. Lubricate properly.
52 /
56
d. The drive shaft and
beater assembly
work f orward.
d. Call an authorized service
technician.
---
e. Worn rear shell
bearing.
e. Call an authorized service
technician.
---
f. Gear box out of
alignment.
f. Call an authorized service
technician.
---
13. The drive
shaft is stuck
in the drive
coupling.
a. Mix and lubricant
collected in drive
coupling.
a. Brush clean the rear shell
bearing area regularly.
92
b. Rounded corners of
drive shaft, drive
coupling, or both.
b. Call an authorized service
technician.
---
c. Gear box is out of
alignment.
c. Call an authorized service
technician.
---
To Next Page
Loading...
