23
LOCK MENU - PROGRAM
The Program menu on the Phoenix spares safe
technicians from needing to carry a copy of
programming procedures for every make and model
of electronic lock. Based on the information found
during the Identification process, the Phoenix will
populate the Lock Programming menu with all available programming options stored in
its memory. You may add to the list of programming options yourself using the advanced
Command Mode interface to program in new abilities and along with the lock make and
model (software 4.0.5 and above required). Most options will require entering the lock
Manager Code. However, the Phoenix will automatically skip this step if the manager
code is already known. After each programming process with Phoenix will confirm that
the procedure was successful.
Some common programming examples:
LaGARD 3045 HANDHELD PROGRAMMER
This feature allows the Phoenix to successfully simulate the
LaGard 3045 Handheld Programmer for programming
features on the 33E ComboGard and 3650 SafeGard.
When the 3045 feature first loads it will download the
current settings from the lock and display them as the
current settings in the 3045 Programmer Menu. If the displayed Manager Code is
incorrect, tap the code to update it. Use the RIGHT ARROW to transition to the 2
nd
menu then tap SEND to transfer the indicated settings to the lock.
To Next Page
Loading...