Taylor PHOENIX - Connect Locks, Interface Cables and Accessories; Junction Box; Locks; Keypad Interface Cables

5
Connect Locks, Interface Cables and Accessories
Junction Box
 Connect to
PHOENIX OUTPUT JACK
on top of Phoenix
Locks
 Connect to LOCK PORTS on Junction Box
Keypad Interface Cables
 BLACK Cable – LAGARD, LP and NL Keypads
o White plug to keypad (tab down)
o Clear plug to KEYPAD JACK
 RED Cable – S&G Keypads
o Black plug to keypad (keyed plug)
o Clear plug to KEYPAD JACK
 GREEN Tag – AMSEC Keypads
o Short end with without tag to keypad
o Long end with green tag to KEYPAD JACK
 YELLOW Tag – SECURAM Keypads
o White plug to keypad
o Clear plug to PHOENIX OUTPUT JACK
Other Cables & Accessories
 RED / BLACK Cable – JUMPBOX
o White plug to keypad battery terminals
o Clear plug to PHOENIX OUTPUT JACK
 BLUE Tag - LAGARD RESET DONGLE
o Black plug to BAT port on lock case
 WHITE/BLACK - AMSEC ESL-10/20 Reset Adapter
o Insert in ACCESSORY PORT on Junction Box for ESL10/20 Reset
o Plug lock into AMSEC Reset
LOCK
AMSEC
LOCK
SENTRY
LOCK
S
ECURAM
LOCK
S
&
G
LOCK
LAGARD
LP/NL
ACCESSORY
PORT
KEYPAD
JACK
PHOENIX
OUTPUT
JACK