tBPC oCare Pro100 - Page 89

Taiwan Biophotonic Corporation
89
transmitter in watts
(W) according to the
transmitter
manufacturer and d is
the recommended
separation distance in
meters (m).
Field strengths from
fixed RF transmitters,
as determined by an
electromagnetic site
survey
a
, should be less
than the compliance
level in each frequency
range
b
.
Interference may occur
in the vicinity of
equipment marked
with the symbol:
NOTES:
1. At 80 MHz and 800 MHz, the higher frequency range
applies.
2. These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures, objects, and people.