tBPC oCare Pro100 - Device Shut down

To Next Page

To Previous Page

Taiwan Biophotonic Corporation

3. BLUETOOTH

radio is turned off automatically after data

uploading completed.

4. Press SWITCH button once to enter the Watch Mode

whenever needed.

NOTE:

1 If BLUETOOTH

link is not established in designated time,

the device enters Sleep Mode to conserve the battery.

2 The last two paired master devices are memorized for quick

BLUETOOTH

connection.

3 The BLUETOOTH® master device and oCareTM Pro 100

shall stay within 10 meter radius range during

BLUETOOTH® connection.

4 The BLUETOOTH

master device shall support

BLUETOOTH

4.0.

5 During measurement, PR and SpO

value and data/time of

the recorded PR/SpO

value are saved at one-second interval

in non-volatile memory. Shut down of the device would not

affect the completeness of the data.

Device Shut Down

Press ENTER buttons for 3 seconds to shut down the

device.