tBPC oCare Pro100 - Table 10. Guidance and Manufacturers Declaration

oCare
TM
Pro 100
88
Table 10. Guidance and Manufacturer’s Declaration -
Electromagnetic Immunity
This device is intended for use in the electromagnetic
environment specified below. The customer and/or user of this
device should ensure that it is used in such an environment.
Portable and mobile RF communications equipment should be
used no closer to any part of the device, including cables, than
the recommended separation distance calculated from the
equation applicable to the frequency of the transmitter.
Immunity
Test
IEC
60601
Test
Level
Compliance
Level
Electromagnetic
Environment -
Guidance
Recommended
Separation Distance
Conducted
RF
IEC
61000-4-6
3 Vrms
150 kHz
to 80
MHz
3 Vrms
d = 1.17
P
Radiated RF
IEC
61000-4-3
3 V/m
80 MHz
to 2.7
GHz
3 V/m
3 V/m
80 MHz to 800 MHz,
d = 1.17
P
800 MHz to 2.7 GHz,
d = 2.33
P
where P is the
maximum output
power rating of the