EasyManua.ls Logo

TBS CROSSFIRE Micro TX User Manual

TBS CROSSFIRE Micro TX
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TBS CROSSFIRE R/C System Revision 2019-03-24
Adaptive Long Range Remote Control System
The TBS CROSSFIRE (XF) system is a R/C link system made for FPV enthusiasts. It features unheard of range
without sacrificing basic functionality such as being immune to interference from onboard equipment, low
latency control or two-way communications including telemetry functionality.
Key features
Long range, adaptive and robust remote control system for your aircraft
Immune to on-board noise
Two-way communication link with real-time link vitals and telemetry
Self-healing frequency hopping link
Receiver beacon mode to recover your downed aircraft
Super easy binding and configuration via built-in OLED display, OpenTX LUA or TBS TANGO remote
Low latency control for perfect immersive feeling
Free output mappable 8 output diversity with integrated backup battery or super tiny receiver ( 4g
weight only ) both with up to 12 channel PPM
Ability to fly with multiple friends at the same time (10 or more)
Dynamic self-selecting or selectable RF power from 10mW to 2W (local restrictions apply)
Dedicated head-tracking input option for full FPV immersion
Transmitter LED shows link health, OLED display for built in configuration
Expansion port for future feature support
1
Question and Answer IconNeed help?

Do you have a question about the TBS CROSSFIRE Micro TX and is the answer not in the manual?

TBS CROSSFIRE Micro TX Specifications

General IconGeneral
BrandTBS CROSSFIRE
ModelMicro TX
CategoryRemote Control
LanguageEnglish

Summary

TBS CROSSFIRE R/C System Introduction

System Components and Overview

Initial Setup and Connections

Micro Transmitter Setup and Operation

Receiver Connectivity Options

Failsafe and BST Connectivity

Failsafe Configuration Options

Setting up 'Cut' or 'Position' failsafe modes for safety.

Operation Status and Link Monitoring

Find Mode for Locating Aircraft

Real-time Telemetry with Apps

System Configuration Methods

Receiver Output Configuration

Transmission Power Control

Dynamic Power and Frequency Management

Operating Modes and RF Profiles

CRSF Connectivity with Flight Controllers

CRSF Wiring and Telemetry Connections

Radio and Receiver CRSF Setup

BetaFlight Configuration for CRSF

Discovering Telemetry Sensors

Advanced Configuration with LUA Scripts

Telemetry Data Points Overview

Firmware Management and TBS Agent

Installing and Using TBS Agent

Guide to downloading, installing, and operating the TBS Agent software.

Emergency Firmware Update Procedures

Methods for recovering devices with firmware issues via emergency updates.

Best Practices for FPV Systems

Related product manuals