26
83532002 Rev C
1.4. Model Number Format
The model numbering system for Genesys
TM
Power Supply Series includes symbols for
features and options. They are separated by dashes.
The following chart explains the model number for the GEN Power Supply Family.
Option AC Input Volts Factory Specials
Note 5 Note 1,2,3 Note 4
IS510
ISOL PROG
0-5V/0-10V
3P208
208VAC,3Φ,47 / 63Hz
Blank for standard
supplies
IS420
ISOL PROG
4-20mA
3P400
400VAC,3Φ,47 / 63Hz
IEMD
IEEE W/ MULTI-
DROP
LAN
LXI CERTIFIED
ETHERNET OPTION
Note 1: See “Specifications” for AC Input Voltage Range.
Note 2: CE Mark with IEMD to 400VDC Output, without IEMD to 600VDC Output.
Note 3: All 3
are four wire input = 3
+ GND (No Neutral).
Note 4: Analog Meters are NOT available.
Note 5: Factory Installed; IS510, IS420, IEMD, or LAN may not be installed
together.
Limit one (1) per Power Supply.
EXAMPLES: GEN10-1000-3P208
GEN10-1000-IEMD-3P400
GEN10-1000-IEMD-3P400-1292
DC OUTPUT
CURRENT
DC OUTPUT
VOLTAGE
GENXXXX—XXXX—XXXXX—XXXXX—XXXX
AC INPUT
VOLTAGE
OPTIONS
FACTORY
SPECIALS
To Next Page
Loading...
