TEC FS-3600 - Page 83

Chapter 3 - Guest Check Functions Check Adjustments
FS-3600 Owner’s Manual 3-43
Item Discount
An item discount is one programmed to one item or one category. It
is entered on a check immediately following the item.
1. Enter the item to the check.
2. Press the {DISCOUNT} key wanted or index the Discount I.D.
number wanted and press {DISCOUNT~NLU}.
3. If prompted, index a manager I.D. and press {TOTAL}.
4. If prompted, index the amount for the discount and press
{TOTAL}.
5. Continue entering items to the check.
Subtotal Discount
A subtotal discount is one programmed to adjust all discountable
items on the check.
1. Enter item(s) to the check.
2. Press the {DISCOUNT} key wanted or index the Discount I.D.
number wanted and press {DISCOUNT~NLU}.
3. If prompted, index a manager I.D. and press {TOTAL}.
4. If prompted, index the amount for the discount and press
{TOTAL}.
5. End the service round by pressing {TOTAL}, {MEDIA} or
{PRINT~CHECK}.