9. FUNCTIONS OF EACH KEY EO1-11152
9. FUNCTIONS OF EACH KEY
9- 4
Key Functions
Reference
page
Customer File Code Open key
This key should be installed in place of the [PB-] key if the
“Customer File” memory option is selected.
10-61
or:
to
SI (Selective Itemizer) Total key
Used to display (and print) the selective itemizer contents.
10-24
or:
SI (Selective Itemizer) Modifier key
Used to reverse the SI (Selective Itemizer) status programmed on
each Department or PLU.
10-22
or:
to
Tax Modifier key(s)
Used to reverse the taxable/non-taxable status on departments,
PLUs, or other tax-status programmable keys. Also used in Tax
Exempt operations.
10-23, 25
Tax Exempt key
Used to declare the exemption of the taxes from the sale.
10-25
Salesperson key
Used to record sales contribution data of each salesperson for
report purpose.
10-57
Repeat key
Used to repeat a department or PLU item entry.
10-6
to
Foreign Currency keys
Used in tendering or exchange with foreign currencies.
10-55
Scale key
This key is used for various scaled items. To enable to register
weight data from the scale, only the Departments programmed with
the Scale-Allowed status or the PLUs programmed with the Scale-
Compulsory status may be operated.
10-21
Tare key
Used to enter the preset tare weight data prior to a scaled item
entry, thus to subtract tare from the gross weight and obtain the net
weight.
10-21
Tare 2 key
Used to calculate the net weight using the % rate set in the PLU
table or the input rate when the scaled item (for Department, PLU)
is entered.
10-21
Tare 3 key
Used to enter the tare weight manually when the scaled item (for
Department, PLU) is entered.
10-21
CODE
OPEN
SI/TL
SI1/TL
SI4/TL
SI/M
SI1/M
SI2/M
TX/M
TX1/M
TX4/M
EX
SALES
PERSON
RPT
SCALE
TARE
TARE 2
TARE 3
To Next Page
Loading...
Need help?
General
