10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11152
10.63 Comment Print
10-64
10.63 Comment Print
Print of the programmed message
|Comment Message Code
| [COMMENT] .............. Programmed message corresponding to the designated
1 to 10 code is printed on the receipt and the remote slip.
Print of a message using character code entry
[COMMENT] Character Code Entry [COMMENT] .................. Message entered by
character code is printed on
the receipt and the remote
slip.
Example) Character code “00” is assigned to “SPACE”.
Character code “34” is assigned to “B”.
NOTES: 1. This operation is available any time outside a sale or inside a sale including during the short
tendering condition, however except the following.
During the Loan transaction
During the Pick Up transaction
During the Paid Out transaction
2. Neither the Item Correct transaction nor the Validation Print is effective for this operation.
OPERATION
(Max. 32 characters; 2-
code is assigned to each
character as shown on the
table below.)
To Next Page
Loading...
