EasyManua.ls Logo

Tech4o Accelerator Pulse - Of 5 Pedometer Setting

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Pedometer Setting
• PRESS ST/STP to select from one of the
six exercise schedule start/stop times
• PRESS MODE to confirm
• PRESS ST/STP to select between off /
start / stop
• PRESS MODE to confirm
• PRESS ST/STP or LAP/RESET to adjust
the hour. Check whether the hour is for
AM or PM
• PRESS MODE to confirm
• PRESS ST/STP or LAP/RESET to adjust
the minutes
• PRESS MODE to confirm
Repeat above steps to set the remaining
exercise schedule start/stop times
HOLD MODE FOR 3 SECONDS to return to
Exercise Settings Menu
HOLD MODE FOR 3 SECONDS to return to
Exercise Mode
Pedometer Setting: 4 of 5 See fig.19
Your accelerator watch is highly customizable;
just tailor the accelerometer sensor to
match your workout. See the following
steps to adjust the sensitivity and sleep
timer of exercise mode
HOLD MODE FOR 3 SECONDS in Exercise
Mode to access Exercise Settings Menu
• PRESS ST/STP or LAP/RESET to scroll
to Pedometer Setting: 4 of 5
• PRESS MODE to enter Pedometer
Setting: 4 of 5
* Press L/R to move the selection by a reverse direction
* * Either a “start” or “stop” time can be for a schedule
or
Increase or decrease
the setting
Continously increase or
decrease the setting
fig.18

Related product manuals