Tech4o Accelerator Pulse - Main Settings Menu; Of 11 Home Time Setting

17
THE MAIN SETTINGS MENU
The main settings menu is used to calibrate all
the settings of your accelerator watch
Note: The main settings menu can only be
accessed via the home time display. If no
button is pressed for 1 minute, the watch
will scroll through all previous screens until
it returns to home time display
Home Time Setting: 1 of 11 See fig.21
HOLD MODE FOR 3 SECONDS in the home
time display to access the Main Settings
Menu
• PRESS MODE to enter Home Time
Setting: 1 of 11
• PRESS ST/STP or LAP/RESET to zero
the seconds
• PRESS MODE to confirm
• PRESS ST/STP or LAP/RESET to adjust
the minutes
• PRESS MODE to confirm
• PRESS ST/STP or LAP/RESET to adjust
the hour. Check whether the hour is for
AM or PM
HOLD MODE FOR 3 SECONDS in Exercise
Mode to access the Exercise Settings Menu
• PRESS ST/STP or LAP/RESET to scroll
to Heart Rate Setting: 5 of 5
• PRESS MODE to enter Heart Rate
Setting: 5 of 5
• PRESS ST/STP to select a set zone: 1- 4
• PRESS MODE to confirm selection
• PRESS MODE to navigate among the 6
settings
• PRESS ST/STP or LAP/RESET to turn
ON/Off
HOLD MODE FOR 3 SECONDS to return to
Exercise Settings Menu
HOLD MODE FOR 3 SECONDS to return to
Exercise Mode
Complete instructions for all the menus,
functions and settings available for heart
Rate data are found in the Main Settings
Menu: Heart Rate Setting: 10 of 11
Main Settings Menus