Need help?Do you have a question about the Technica Engineering CM CAN Combo and is the answer not in the manual?
General| Operating Temperature | -40°C to +85°C |
|---|---|
| Weight | 150 g |
| Protection Class | IP40 |
| Interfaces | CAN, USB |
| Baud Rate | 10 kbit/s to 1 Mbit/s |
Details device features, warranty terms, and essential safety guidelines for operation.
Official documents confirming device compliance with EU directives and hazardous substance restrictions.
Lists included items and differentiates between various hardware versions of the CM_CAN_Combo.
Overview of all hardware interfaces, connector types, and their detailed pinning information.
Explains the rotary switch for configuration and the function of device status LEDs.
Guides on accessing the web interface and viewing system status and versions.
Covers general settings, IP configuration, and power management modes (sleep/standby).
Monitors port status and configures various network ports like Host, 100BT, GB-A, CAN, FlexRay, RS232.
Configures logging parameters, traffic shaping, and filters for data capture.
Detailed configuration settings for various physical ports on the device.
Manages XCP data acquisition and device synchronization using PTP (802.1AS).
Details requirements and steps for updating the device firmware via different ports.
Explains the structure of TECMP frames and relevant protocol fields.
Provides version history and contact details for technical support.
To Next Page
