Time Stamp:
Timestamp is in nano seconds [ns] resolution and with an accuracy of 40 nano
seconds [ns] (starting with epoch time, if no PTP master is connected)
Messages Received: Counter for received messages on this port from the connected
Flexray-Bus
Messages with Error: Counter for received messages on this port from the connected
Flexray-Bus containing an error. For example CRC errors.
4.5.7 RS232 Port
Figure 4-25: RS 232 Port
Port name: Port name of the RS232-ports can be changed.
Output to: Here you can define the logging port of the incoming traffic on this port.
None: no logging port defined => no logging possible
100Base-T1: 100Base-T1 port is defined as logging port (Not the Host!)
GB-A: GB-A is defined as logging port
To Next Page
Loading...