Figure 4-34: P-Delay
The measures of the propagation delay are performed by each attached link of an
802.1as communication, it means each side of the link will generate and response to
these packets, called:
Pdelay_Request,
Pdelay_Response and
Pdelay_Response_Follow_Up.
4.8.3 How to setup a synchronized network with
CaptureModules
TBD.
The available ports for this synchronization are only the GB-Port and the 100B-T1 port
at the frontside of the CaptureModule
Note: If there is already one port defined as Bridge-slave there is no more a Bridge-
slave-port or 802.1AS Master-port possible.
To Next Page
Loading...