HW-IP address: This is the current IP address of the GB-port or 100BASE-T1 port (SPY
Core) set by the rotary switch. It is not configurable except in rotary switch position
“E”. For more information please see CHAPTER 2.2.1.
Please type the new IP address in the field (in rotary switch position “E”). After leaving
the focus of this field or pressing “Enter” you can save the changes.
4.4 Control Panel Tab
On this tabulator you can import/export the configuration and make general settings
of the configuration.
Figure 4-5: Control Panel
To Next Page
Loading...