Export Configuration: Applied changes can be exported by pressing the button
“Export”. You can choose between these two file-extensions: *.cfg and *.json:
Note: Export as *.json-file: If the *.json-file is bigger than the system can handle at
once, there will appear more than one download window:
Figure 4-8: Download windows
Import Configuration: Press the button Import, then please choose the file-extension
of the configuration-file and click on that button.
Note: Import as *.json-file: please be aware, that there can be needed more than one
*.json file for import the complete configuration. Please see Export Configuration.
After that, please press the button “Browse”,
and select your configuration-file. Alternatively, you can copy the path of the
configuration file in the field. Then press the button “Submit Query”,
Apply the changes by saving the configuration. Please check the box for restart.
Default: This button resets the CM_CAN_Combo to default configuration, but not the
default IP addresses!
To Next Page
Loading...