Technica Engineering CM CAN Combo - Features

CM CAN Combo User Manual
6
Features:
6x CAN / CAN-FD
1x FlexRay
2x RS-232/TTL
Easy configuration via Webserver
Network Time Synchronization (802.1AS) – allows to synchronize with any
other CaptureModule
Source Timestamping with 40 ns resolution
Rotary switch for manual configuration of the device’s IP address
Wakeup capable
Robust stainless-steel case
General Information:
High voltage variant available (please check here CHAPTER 1.6)
Power requirement:
6 to 18 Volt DC (nominal 12 Volt DC)
Power consumption in operation mode:
3.2 to 4.3 Watt
Power consumption in standby mode:
Less than 0.025 Watt
Size:
133 x 130 x 33 mm
Weight:
0.5 kg
International Protection:
IP 2 0
Operating temperature:
-40°Celsius to 80°Celsius
LINKS:
The User can download the latest documentation for the CM_CAN_Combo here:
https://technica-engineering.de/produkt/capture-module-can-combo/
For the latest firmware, please contact Support@technica-engineering.de