Technica Engineering CM CAN Combo - Page 14

CM CAN Combo User Manual
14
Advantage 4 pins: The stub is only 5mm (internal in the device) and no termination
needed.
Disadvantage: the device or a bridge connector has to be plugged.
Note: there is no internal termination in the CM_CAN_Combo for the CAN-Ports
Name
Picture
Part Number
Tyco, MQS Abdeckkappe 2x13Pol, Black
0-1452031-1
Tyco, MQS Buchsengehäuse 2x13 Pol Black
1452076-1
Tyco crimp contact
928999-1
Table 2-3: Parts of Tyco MQS Connector
Note: You can use the official Tyco tool for these crimp contacts. A cheap variant is
the crimp tool for “PSK” contacts.
Pin
Function
Pin
Function
1
CAN-FD F Minus
14
CAN-FD F Minus
2
CAN-FD F Plus
15
CAN-FD F Plus
3
CAN-FD E Minus
16
CAN-FD E Minus
4
CAN-FD E Plus
17
CAN-FD E Plus
5
CAN-FD D Minus
18
CAN-FD D Minus
6
CAN-FD D Plus
19
CAN-FD D Plus
7
Reference GND
20
Reference GND
8
CAN-FD C Minus
21
CAN-FD C Minus
9
CAN-FD C Plus
22
CAN-FD C Plus
10
CAN-FD B Minus
23
CAN-FD B Minus
11
CAN-FD B Plus
24
CAN-FD B Plus
12
CAN-FD A Minus
25
CAN-FD A Minus
13
CAN-FD A Plus
26
CAN-FD A Plus
Table 2-4: Pinning of Tyco MQS Connector