4.9.3 Example for changing of a Channel ID of a CAN-ID on
two CAN-busses
Figure 4-36: Example Advance Filter BusSpecID Change
This rule changes the BusID from messages logged on port CANB and CANC to 0xacf,
if they have the CANid 0x123
Doing:
Navigate to rule number by the buttons and ➔ press button ➔ press
the button ➔ select the CAN-Bus B and CAN-Bus C ➔ select the action Change
BusSpecId ➔ type in Parameter “acf” and press ENTER ➔ select the open bracket ➔
choose in Field “CAN ID” ➔ press the button ➔ type the value 123 and press
ENTER ➔ select the close bracket ➔ press the button ➔ save the changes. ➔
finished
To Next Page
Loading...
