4 CONFIGURATION OF THE DEVICE
4.1 Save Changes
If you change anything in the configuration the following hint appears:
Figure 4-1: Save Configuration
You don’t have to save every time when this hint appears. You can make all wished
changes and save the configuration at the end.
Please check the box “restart after saving” and then press the “Save configuration”
button.
After the restart, all changes are applied.
4.2 Home Screen
Figure 4-2: CM_Eth_Combo Home Screen
With the first access to the website you will get the home screen. Please select one of
the tabs for further configuration. Also, you reach this home screen again by clicking
the technica-engineering logo.
To Next Page
Loading...