address in the field. After leaving the focus of this field or pressing “Enter” you can
save the changes.
HW-IP address: This is the current IP-address of the GB-port configured by the Rotary-
Switch. It is not configurable except in Rotary-Switch status “E”. For more information
please see CHAPTER 2.2.1.
Please type the new IP-address in the field. After leaving the focus of this field or
pressing “Enter” you can save the changes.
4.4 Control Panel tab
On this panel tabulator you can import/export the configuration and make general
settings of the configuration.
Figure 4-5: Control Panel
To Next Page
Loading...
