4.5.5 1000BASE-T1 Ports
Figure 4-23: 1000BASE-T1 Ports
Port name: Port name of every 1000BASE-T1 Port can be changed.
Base-T1 mode: You can change here the Master/Slave Configuration of the 1000BASE-
T1 Port
Port speed: Here you can choose compliance with 1000BASE-T1 and 100BASE-T1
Phy Mode: Here you can choose compliance with IEEE or A0-Phys from Marvel
IEEE: IEEE-compliant
Legacy: Working in Configuration of A0-Phy from Marvel
Output to: Here you can define the logging port of the incoming traffic on this port.
None: no logging port defined => no logging possible
GB-A: GB-A is defined as logging port => logging with this port is possible.
GB-B: GB-B is defined as logging port => logging with this port is possible.
To Next Page
Loading...