SETUP & USER GUIDE
Copyright © 2012 Technicolor. All rights reserved.
DMS-CTC-20120508-0000 v1.0.
No. LED Description
6 Internet LED Lights up to indicate Internet connection status.
▪ Solid GREEN – Internet is connected but no activity.
▪ Flashing GREEN – Data transmission is in progress.
▪ Solid RED – Internet connection failed.
▪ Off – No internet connection.
1.2.2 Rear Panel
No. Ports / Buttons Description
1 DSL port Connects to the DSL line using the RJ-11 cable.
2 Reset button Press and hold this button for at least 10 seconds to restore your
device to its original factory default setting.
3 LAN LED 1, 2 The LAN LED (1, 2) lights up when a device is connected to the
Ethernet port (1, 2).
4 Ethernet port
1, 2, 3, 4
Connects a computer and other Ethernet network devices to the
Wireless Gateway using RJ-45 cables.
5 LAN LED 3, 4 The LAN LED (3, 4) lights up when a device is connected to the
Ethernet port (3, 4).
6 DC In jack Connects to the power adapter.
7 Power button Press to turn your device on or off.
8 WPS button Press 1 to 8 seconds to enable or disable WLAN.
Press for more than 8 seconds to enable WPS.
To Next Page
Loading...
