Technicolor TD5130 Setup & User Guide

9
SETUP & USER GUIDE
Copyright © 2012 Technicolor. All rights reserved.
DMS-CTC-20120508-0000 v1.0.
2.5 Check the Installation
To ensure that all devices are properly connected, check the LED indicators on the front of your
Wireless Gateway. For basic installation, the following LEDs must be lit:
▪ Power LED
▪ Ethernet LED
▪ DSL LED
The lighted LED indicators vary depending on the type of connection that you make. See “Front Panel”
on page 5 for more information about the LED indicators.

Technicolor TD5130 Specifications

General

Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
ADSL Standards	ANSI T1.413 Issue 2
ADSL2 Standards	ITU G.992.3 (G.dmt.bis) Annex A
ADSL2+ Standards	ITU G.992.5 Annex A
Wireless	802.11b/g
Ethernet Ports	4 x 10/100
USB Ports	1 x USB 2.0
VoIP	No
Security	WEP, WPA, WPA2