DSP
S_rOB_o _RROdtID
o o
(©
[U--
SmREOSURR0UlWSr¢
__Or-
Digital Signal Processor (DSP)
Youcan take advantage ot the following modes with this unit•
D STEREO mode
Use this mode when you want to listen to stereo sources, whether
they are digital or analog, or when you want to p{ayback Dolby
Digital or DTS sources through two channels. The sounds usually
fed through the other speakers are down-mixed so they are output
through the left and right front speakers. There may be some
change in the overall sound when surround sources are down-
mixed.
] SURROUND mode ]
By selecting this mode while digital input is being used, the unit
automatically determines 1he kind of digita_ source being used
(Dolby Digital, Dolby Surround, or DTS), and processes it
accordingly. Select this mode also when you are playing back an
analog source, VCR for example, that has been recorded in Dolby
Surround.
Software with the following mark can be played back in this mode.
DIGITAL
D I G I T A L SUReOUNO
The following indicators light depending on the source.
f30 PRO LOGIC
When playing analog sources.
When playing digital sources with PCM signals.
When playing Dolby Digital sources that contain Dolby Pro
Logic.
I1rl DIGITAL
When playing Dolby Digital sources.
When playing DTS sources.
Dolby Pro Logic
Dolb¥ Digital
DTS
RQTS30S
Manufactured under license from Dolby Laboratories. 1
"Dolby", "Pro Logic" and the double-D symbol are trademarks of|
Dolby Laboratories• Confidential Unpublished Works. _) 1992-|
1997 Do by Laborator es, nc. All righ s reserved. J
Manufactured under license from Digital Theater Systems, Inc. 1
IUS Pat. No. 5,451,942 and other world-wide patents issues and|
pending. "DTS" and "DTS Digital Surround" are trademarks of !
Digital Theater Systems, Inc. _) 1996 Digital Theater Systems,|
Lnc. A righ s reserved, j
To Next Page
Loading...
