The remote control
This remote control can be used to operate this unit and some other Panasonic and Technics cassette decks, CD players, TVs. VCRs and
DVD players, provided they are equipped with a remote control sensor.
It is also possible to change-over the remote control code so that the remote control can operate TVs and VCRs which have not been
manufactured by this company (q. page 38).
RQT5308
Basic operations
To turn the unit TUNER/
BAND 6
ON/OFF (_) I_ (_
To select an input
source and switch the
remote control
to each operation
mode
TUNER/
TAPE VCR TV DVD CD BAND
QQQQ OO
• PHONO can not be selected with this remote control•
• TAPE MONITOR cannot be controlled with the [TAPE] button.
To turn on the STEREO
STEREO mode (_
To turn on the s0m0_
SURROUND mode (_
Changes as follows each time lhe button
is pressed.
To turn SFC on and SFC
select the mode (_ HALL -- CLUB -- LIVE --THEATER
L SiM SURR (SIMULATED)--J
TEST
To output a test signal (_) Press once more to stop the test signal.
LEVEL +
To select the speaker
channel and adjust its
output level
To change the
surround channel
delay time
To mute the sound
level
To adjust the volume
When the SURROUND or SFC modes are on
You can adjust the level of the center and surround speakers and
the subwoofer.
When the STEREO mode is on
You can adjust the level of the subwoofer.
When the SFC modes are on
DELAY
(D.
MUWNG
(2)
The message "MUTING ON NOW" runs
repeatedly from right to left across the display :
as long as the muting function is on.
Press once more to return to the original
volume.
-- VOL +
CDCD
To Next Page
Loading...
