About the HELP function/:}
-HELP
-RESET
@
in
If you make a mistake in operation or if sound output stops due to
some operation which was performed, the HELP function displays
information which can be useful for indicating the method by which
this condition can be remedied.
If "ERROR" or scrolling characters (for instance, "SPEAKER OFF
NOW") appear on the display during operation, carry out the •
following operation.
Press [-HELP,-RESET].
The method for remedying this situation will be displayed,
For your reference
If the above button is pressed for 2 seconds or more until
"RESET' appears on the display, the operation settings for the unit
will be initialized to the settings made at the time of shipment.
However, any stations which have been preset into memory will not
be erased at this time.
a
#:
RQT5308
To Next Page
Loading...
