TechniSat DIGITRADIO 143 CD

19
EN
FR
IT
NL
PL
CZ
SK
3.7 Menu operation
The menu is divided into the Main Menu, the Submenu for the currently selected source, and System Seings, which apply to
all sources. Operation within the menu takes place using the SCROLL&SELECT knob (14) on the device or using the up/down
arrow buons (22, 24) and the OK (9) buon on the remote control.
> To open the submenu corresponding to the currently selected source, press the MENU buon on the device or on the
remote control.
The source-specific seings and options are in the submenu corresponding to the currently selected source. From here
you can also access the > Main Menu and the > System Seings.
> You can move the highlight up and down by rotating the SCROLL&SELECT knob to the right and le or by pressing the
arrow buons p or q on the remote control.
> You can confirm your choice by pressing the SCROLL&SELECT knob or the OK buon on the remote control. If a seing
has been changed, it is saved by pressing the SCROLL&SELECT knob or the OK buon. If there is an arrow (>) next to a
menu item, additional seings or functions can be accessed by pressing the SCROLL&SELECT knob or the OK buon.
> Press the MENU buon to exit the menu. Depending on the submenu or option you currently have selected, the MENU
buon may have to be pressed repeatedly.
> Should you wish to cancel a seing without saving it, press the MENU buon or, alternatively, the BACK (7) buon on the
remote control.
The detailed description of the device functions in these instruction manual is given using the buons on the remote
control.