EasyManuals Logo

TechniSat DIGITRADIO 143 CD User Manual

TechniSat DIGITRADIO 143 CD
380 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
45
EN
FR
IT
NL
PL
CZ
SK
The entered password is now verified. This process is generally completed in a few seconds and the WLAN connection
can now be used.
14.2.2.2 Configuration via the WPS function
This establishes a direct connection to the router. Selecting and/or entering a WLAN network (SSID) and password is not
required.
> Start the WPS function on your router as per the instruction manual.
> Then select [PBC WLAN structure] to launch the connection process.
Please observe the display overlays. The connection process is generally completed in a few seconds and the WLAN
connection can be used.
14.2.2.3 Manual configuration
> Select [Manual seings] then [Wireless] to launch manual configuration.
> Now select whether to allow automatic retrieval of the IP address, gateway etc. from your router (DHCP active) or if you
would like to enter this manually (DHCP inactive).
Please take into account that automatic retrieval of the IP address, gateway, subnet mask only works if the DHCP function
is activated in your router.
> One by one, enter the IP address, subnet mask, gateway address, primary DNS and secondary DNS if required, using the
Arrow buons on the remote control. Confirm each set value with the OK buon.
> Now enter the name (SSID) of your WLAN network using the virtual keyboard and confirm with OK.
> Select whether your WLAN network is Open, encrypted by WEP or by WPA/WPA2 and confirm the following item.
> Continue to use the virtual keyboard to enter your WLAN password and confirm with OK to start the connection process.
In general, the WLAN connection can be used aer a few seconds.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat DIGITRADIO 143 CD and is the answer not in the manual?

TechniSat DIGITRADIO 143 CD Specifications

General IconGeneral
Package weight3600 g
Package depth130 mm
Package width500 mm
Package height340 mm
Disc types supportedCD, CD-R, CD-RW
Optical drive includedYes
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)1.7 W
Power consumption (typical)15 W
Audio formats supportedMP3
HDMI in-
Audio (L/R) in1
Headphone connectivity3.5 mm
Receiver typestereo
Audio output channels- channels
Power output per channel (20-20KHz@8 Ohm)- W
DisplayTFT
Apple dockingNo
Product colorBlack
Display resolution240 x 320 pixels
Bluetooth version4.2
Bluetooth profilesA2DP, AVRCP
FM band range87.5 - 108 MHz
Supported radio bandsDAB+, FM, UKW
Internet radio services supportedSpotify
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)5 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth290 mm
Width435 mm
Height75 mm
Weight2750 g

Related product manuals