21
EN
FR
IT
NL
NW
DK
PL
CZ
SK
> Do not place any heavy objects on the device.
> If you move the device from a cold environment to a hot environment, moisture could accumulate inside
the device. In such a case, wait approximately one hour before puing it into operation.
> Lay the mains cable in such a way that nobody can trip over it.
> Ensure that the mains cable or the power supply unit are always easily accessible so that the device can
be quickly disconnected from the power supply.
> The power outlet should be as close to the device as possible.
Insert the plug fully into the socket to ensure connection to the mains.
> Use a suitable, easy-to-access mains connection and avoid using multiple socket strips.
> Do not touch the mains plug with wet hands; electric shock hazard.
> In the event of a malfunction or the detection of smoke or odour from the housing, remove the plug
from the power outlet immediately.
> Remove the plug before a storm starts.
> Remove the plug if the device is not going to be used for a prolonged period, e.g. before going away on
a long trip.
> If the device is not to be used for a long time, remove the baeries since they could leak and damage
the device.
> Excessive volume, in particular when using headphones, can damage hearing.
> Do not set up the unit in the vicinity of devices which emit intense magnetic fields (e.g. motors, speakers,
transformers). Even telephones or mobile phones can lead to malfunctions.
21
To Next Page
Loading...
Need help?
General