37
EN
FR
IT
NL
NW
DK
PL
CZ
SK
7.2 Manual station scan
> Briefly press the TUNING s/9 or TUNING r/: (10, 9) buons on the device or the TUNING s/97 or
TUNING r/8: (45, 25) buons on the remote control as oen as required until the frequency of the
desired radio station has been reached.
Alternatively:
> By pressing the SELECT/VOLUME knob on the device, or ENTER on the remote control, you can switch
between volume control and TUNING (manual station scan) in this function. The frequency can then be
set by rotating the knob. In order to return to the volume control function, press the SELECT/VOLUME
knob or ENTER again.
The frequency will be adjusted in 50 kHz steps. However, given that the display shows the broadcasting
frequency in MHz, the display changes accordingly in steps of 0.05 MHz.
7.3 Saving FM stations to a memory slot
The programme memory can save up to 30 stations in the USW range - these are not lost even if there
is a power cut.
> As described above, select the USW station you wish to store on a memory slot.
> Press and hold the PRESET buon on the device or on the remote control while the station is playing
until Save and the programme memory slot starts flashing.
37
To Next Page
Loading...
Need help?
General