6.2.7
Manual settings
This menu item is used to check the reception channels and can be used to set the
antenna
>
Hold down the Info/Menu button and use the Tune +/- knob to select the
[Manuell einstellen] and press the Enter button.
>
Use the Tune +/ - knob and Enter to select a channel (5A to 13F) The display
will now show the signal strength. If a DAB+ station is received on the channel,
the multiplex name of the station is displayed.
Transmitters whose signal strength is less than the required minimum signal
strength
will not send an adequate signal.
To Next Page
Loading...
Need help?
General