setting.
>
Next, select how often you want the alarm to be repeated. You can choose
between Einmal (Once), Täglich (Daily), Werktags (Monday to Friday) or
Wochenende (Saturday and Sunday). Press Enter to accept the setting.
If [Einmal] is selected, you can set a date on which the alarm clock is to be
active only once.
>
Now select the volume of the alarm signal with the Vol+/- knob, then press
Enter to save.
>
Finally, activate the alarm [Ein] and press Enter to save the alarm setting.
The alarm clock is active if [Ein] was set in the last setup step.
In standby mode, a bell symbol appears on the display. In the setting
[Aus] the alarm clock is not active at the set time and is switched off.
In standby mode, press the Alarm button several times to display the various
On and Off alarm clock combinations.
To Next Page
Loading...
Need help?
General