TECHVIEW QV-3028 - Web Config: Network & Alarm; Web Config: Device Settings

6.3.3.2 Record
Click <Record> option to unfold its sub
stream.
1、 Record Parameters:
Under [Record parameters] option, allow you set channel
pack time and Pre-
record status
2、 Schedule:
Detailed parameters please refer to DVR local setting.
Green stand for Normal record; Yellow stands for Motion detection; Red stands for I/O
triggered record.
3、 Main Stream:
detailed settings please refer to DVR local setting. Herein allow
the resolution, frame rate, Bit rate and audio of the record channel.
37
Picture 6-14
Click <Record> option to unfold its sub
-
options: Record parameter, Schedule and Main
Under [Record parameters] option, allow you set channel
record status
shown as Picture 6-1
Picture 6-15
Detailed parameters please refer to DVR local setting.
Green stand for Normal record; Yellow stands for Motion detection; Red stands for I/O
Picture 6-16
detailed settings please refer to DVR local setting. Herein allow
the resolution, frame rate, Bit rate and audio of the record channel.
User Manual
options: Record parameter, Schedule and Main
Under [Record parameters] option, allow you set channel
, record enable,
Green stand for Normal record; Yellow stands for Motion detection; Red stands for I/O
detailed settings please refer to DVR local setting. Herein allow
user modifies