TECHVIEW QV-3028 - Web Config: System Settings

Picture
6
6.3.3.3
Network Parameters
Unfold <Network> option to enter into its sub
and DDNS configuration.
1、
The model support three network type, including Static, DHCP and PPPoE
Static: System default <Static> as its network type
forwarding for DVR according to different router. When set <UPNP> to
to perform port forwarding. Once you modify its network parameters successfully, DVR will
automatically restart.
DHCP: Set network
type to “
consistent with DVR local setting.
38
6
-17
Network Parameters
Unfold <Network> option to enter into its sub
-
options: Network, sub stream, Email,
The model support three network type, including Static, DHCP and PPPoE
Static: System default <Static> as its network type
. User could allocate IP and perform Port
forwarding for DVR according to different router. When set <UPNP> to
“
On
to perform port forwarding. Once you modify its network parameters successfully, DVR will
Picture 6-18
type to “
DHCP” shown as Picture 6-
19. Relative parameters should be
consistent with DVR local setting.
Picture 6-19
This figure is only for 16CH-
CIF model reference
User Manual
options: Network, sub stream, Email,
mobile
. User could allocate IP and perform Port
On
”, user no needs
to perform port forwarding. Once you modify its network parameters successfully, DVR will
19. Relative parameters should be
CIF model reference