TECHVIEW QV-3028 - Web Config: Display & Recording

Tick-
select the record file you want to download and click [Start download]
System will download the record file in turn and save to local PC.
6.3.3 Configuration
Click [Configuration] option to enter into the [Config] interface shown as Picture 6
and
allow you set Display configuration, Record, Network, Alarm, Device, System
parameters and Advance according to your actual request.
6.3.3.1
Display Configuration
Unfold [Display] option to find its sub
1、Live: Allow
you modify channel name, Position, Show time and Record time. If show time is
set to <disable>, current system time will not appear on the screen on Live mode; and if record
time is set to <off>, system time can
2、Privacy zone:
Each channel could set up to four privacy zones shown as Picture 6
parameters please refer to section 5.3.1.3. If you want to delete one privacy zone, please firstly
select one zone, and then click <Clear> button and click <
36
Picture 6-12
select the record file you want to download and click [Start download]
System will download the record file in turn and save to local PC.
Click [Configuration] option to enter into the [Config] interface shown as Picture 6
allow you set Display configuration, Record, Network, Alarm, Device, System
parameters and Advance according to your actual request.
Display Configuration
Unfold [Display] option to find its sub
-options: Live and Privacy zone
you modify channel name, Position, Show time and Record time. If show time is
set to <disable>, current system time will not appear on the screen on Live mode; and if record
time is set to <off>, system time can
’t be found in the record file.
Picture 6-13
Each channel could set up to four privacy zones shown as Picture 6
parameters please refer to section 5.3.1.3. If you want to delete one privacy zone, please firstly
select one zone, and then click <Clear> button and click <
Save> on the right corner
User Manual
Click [Configuration] option to enter into the [Config] interface shown as Picture 6
-13
allow you set Display configuration, Record, Network, Alarm, Device, System
you modify channel name, Position, Show time and Record time. If show time is
set to <disable>, current system time will not appear on the screen on Live mode; and if record
Each channel could set up to four privacy zones shown as Picture 6
-14. Details
parameters please refer to section 5.3.1.3. If you want to delete one privacy zone, please firstly
Save> on the right corner