5.10.2 Events
This menu allows you to set the type of events that you want the WIRELESS NVR to inform you.
Event Type: Select the event type. Options are:
- Disk Full: When HDD is full.
- Disk Error: If HDD is not detected properly.
- Video Loss: If camera is not detected properly.
Enable: Check the box to enable the monitoring of the event.
Show Message: Check the box to display a message on the screen when Disk Full, Disk Error, or
Video Loss event happens.
Send Email: Let the WIRELESS NVR to send you an auto-email when an event occurs.
Buzzer: Set the buzzer duration when the event occurs (Off/10s/20s/40s/60s). To disable buzzer,
select OFF.
To Next Page
Loading...