TP8-96 VIDEO - Installer Manual Programming of zones and programs
2-23
z Chime
The siren is activated if the chime open zone is completely excluded from the programs or if it is included in one of
the programs associated to the siren.
The sound type is fixed.
z Enabling antifoam
Permits enabling/disabling of the antifoam optical protection.
z Enabling antidrilling
Permits enabling/disabling of the antidrilling protection.
z Activation mode
Determines the activation mode of the siren when the control panel detects an alarm:
• Not active The siren is not active
• Sounding Only the sound is activated
• Flashing light Only the flashing light is activated
• Sounding+ Flashing light Sound and et flashing light are activated
Check the corresponding item to enable the option, then press:
z OK to confirm and quit
z Abandon to quit without saving
To Next Page
Loading...
