Tecnoalarm TP8-96 - Table of Contents

TP8-96 VIDEO - Installer Manual Index
1
INDEX
1. INTRODUCTION TO THE TP8-96 VIDEO SYSTEM
1.1 PROGRAMMING MENU 1-1
1.2 HARDWARE CONFIGURATION - AVAILABLE MODULES 1-7
2. PROGRAMMING OF ZONES AND PROGRAMS
2.1 ZONE CONFIGURATION 2-1
2.1.1 Creation of list and parameters 2-1
2.1.2 Zone-function association 2-11
2.1.3 Zone-program association 2-13
2.1.4 Consoles 2-14
2.1.5 Keypoints 2-16
2.1.6 Options 2-17
2.1.7 Outputs 2-20
2.1.8 Bus sirens 2-22
3. PROGRAMMING OF TELEPHONE SECTION
3.1 TELEPHONE PARAMETER CONFIGURATION 3-1
3.1.1 Telephone channels and standard telephone parameters 3-1
3.1.2 GSM module 3-4
3.1.3 Tecnocell 3-6
3.1.4 Ethernet 3-8
3.1.5 Teport codes 3-10
3.1.6 Opening message - vocabulary 3-11
3.1.7 Remote controls 3-13
3.2 EXPLANATORY NOTES 3-14
3.2.1 Telephone numbers 3-14
3.2.2 Protocols 3-15
3.2.3 Communicator block 3-17
3.2.4 Airtime request 3-17
3.2.5 Call-back 3-18
3.2.6 Ethernet 3-20
3.2.7 Remote control management by SMS 3-21
4. PROGRAMMING OF TIME PARAMETERS
4.1 TIME SETTINGS 4-1
4.2 TIMERS 4-3
4.3 ACCESS PERIODS 4-5
4.4 CUSTOMIZATION OF THE CALENDAR 4-7
4.5 EXPLANATORY NOTES 4-9
5. POGRAMMING OF ACCESS CODES AND KEYS
5.1 PROGRAMMING OF THE CODES 5-1
5.2 PROGRAMMING OF THE KEYS 5-4
5.3 PROGRAMMING OF THE WIRELESS KEYS 5-6
5.4 EXPLANATORY NOTES 5-8
6. PROGRAMMINNG OF WIRELESS DEVICES
6.1 PROGRAMMING OF THE WIRELESS SIRENS 6-1
6.2 PROGRAMMING OF THE WIRELESS CONSOLES 6-3