TP8-96 VIDEO - Installer Manual Programming of zones and programs
2-17
2.1.6 OPTIONS
Open the zone configuration tables and select the Option window. On the screen is viewed:
The option table permits to set the following system options:
BUZZER SECTION
The buzzer of the consoles can be actived for the following
operating conditions:
z Chime
The buzzer is activated if one of the chime zones is opened and
the relative program is disarmed.
• Continuous
The buzzer emits a 3s beep upon opening of the zone and
becomes continuous if the zone remains open.
• Pulse
The buzzer emits a 2s beep upon opening of the zone.
z Exit time
The buzzer is active during the programmed exit time.
z Entry time
The buzzer is active during the programmed entry time.
z Alarm
The buzzer is active during the programmed alarm time.
z End of by-pass warning
The buzzer is active during the time end-of-by-pass warning
displayed.
z Automatique arming warning
The buzzer is active during the time automatic arming is
displayed (arming timer).
z Sound report
Permits enabling/disabling of the voice report by the consoles. If
enabled, the above operating conditions are accompagnied by a
voice message.
To Next Page
