Tecnoalarm TP8-96 - Programming of Access Codes and Keys; Programming of the Codes

TP8-96 VIDEO - Installer Manual Programming of access codes and keys
5-1
5. PROGRAMMING OF ACCESS CODES AND KEYS
Permits programming of the control panel access parameters. Click on the above icon. On the screen is viewed:
The tables of the access configuration permit:
z Programming of the codes
z Programmation of the keys
z Programmation of the wireless keys
5.1 PROGRAMMING OF THE CODES
The code configuration table permits:
z Programming of the code name
z Programming of the code value
z Association of the functions
z Programming of the length of all the system's codes
z Association of the programs
z Programming of the attributes of the codes
SELECTION OF THE CODE
Select the item next to Code and scroll down the list then, click
on the name of the code to be programmed.