TECO E510s Series - Page 114

4-48
Group 16 LCD Function Parameters
Code Parameters Setting Range Default Unit
Control Mode
Attribute
V/F SLV
PM
SLV
16-08
Selection of
Allowing
Reading
0：Do not allow to read inverter parameters
or save them to the operator.
1：Allow to read inverter parameters
and save to the operator.
0 - O O O *7
16-09
Selection of
Operator
Removed (LCD)
0：Keep operating when LCD operator is removed.
1：Display fault when LCD operator is removed
0 - O O O *1*7