7-69
Sn216 Analog speed command proportioner
JSDG2S-E(L) does not have this
function
【
5-3-2
】
Initial Value Unit Setting Range Effective Cn029 Reset
Rated Speed rpm/10V 100 ~ 10000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0210H - - -- -- -- O --
Setting Description: Used to adjust the slope of Voltage Command relative to the Speed Command.
Note): This Parameter is the same as Tn109, with different Functions under different Modes
Sn217 Analog speed command offset adjustment
JSDG2S-E does not have this
function
【
5-3-2
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 mV
-2500 ~ 2500 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0211H - - -- -- -- O --
Setting Description: Used to correct offset when the Analog Speed Command Voltage generates the offset phenomenon.
To Next Page
Loading...
