TECO JSDG2S-20A-EL - Page 154

5-29
Speed Command (%)
Time (ms)
Sn206
100
50
Speed Command
63.2
Setting Example:
(1) To reach 95% of Speed Command output in 30ms, then
10(msec)
95%)-ln(1-
30(msec)
Sn206 
(2) To reach 75% of Speed Command output in 30ms, then
22(msec)=
75%)-ln(1-
30(msec)
=Sn206
Note) ln(x) is the Natural Logarithm Operation symbol